Product #648

Asphalt Based Pavement Sealer

Notice: this Product has been replaced by Pavement Sealer LP-See for details

x-10 logo

• Extends pavement lifecycle
• Dries to dark, sleek appearance
• Prevents deterioration from rain, sun and
   other potentially destructive chemicals
• Decreases long term maintenance costs

Product Description
X-10 Asphalt Based Pavement Sealer is an asphalt based sealer designed for maximum protection of pavement without the irritating fumes sometimes associated with using 100% coal tar sealer. The enhanced appearance achieved combined with the ease of use makes X-10 Asphalt Based Pavement Sealer an ideal choice for parking lots and driveways.

General Characteristics
X-10 Asphalt Based Pavement Sealer is a concentrated material designed to be diluted with water 20% by volume depending on weather conditions and mix design. Coverage rates vary from 50 square feet to 100 square feet per gallon depending on the condition of the asphalt.

55 gallon drum

Air temperature should be at least 50°F, 24 hours before and 24 hours after sealing the pavement. Do not apply if rain is predicted. Drying time depends on temperature, humidity, and time of day of application. Do not apply over oil based sealers or on asphalt that is not fully cured, usually 90 days after paving. Two coats are recommended but one coat may be sufficient. Keep from freezing. Read MSDS and safety warnings before use.

Before You Seal
Contact Extendit's sales staff to find out more about other useful pavement maintenance products at 1-800-245-0005.